Whether you’re new to cattle work or want to improve your cattle-driving skills, you’ll need to learn how to influence a cow’s movements. How you and your horse approach, track, and drive a cow influences where it will go next. To master driving and turning a cow in the arena, you must know where to position your horse.

“The best way to control a cow is to be closer to the cow,” says trainer Cody Crow. “A lot of people feel it’s safer away from the cow, but if you’re too far away, the cow can move where it wants to go. Make sure to step up and influence where you want the cow to go.”

Here, Crow helps you position your horse so you can drive a cow forward and then change the cow’s direction. He’ll teach you how to visualize where to be.

He also shares his teaching strategy: to take turns acting out the part of cow and rider with another riding friend. Whether you don’t have cattle to practice with or if you just want to boost your confidence, riding and “moving” another horse and rider can help you understand where to be when you’re working cattle.

The Pressure Points in Cattle Work

When he first teaches students to drive and turn cattle, Crow says he has riders follow a cow and learn where to be to get the forward drive. Working in his large arena, riders first follow and track the cow, then learn to drive it forward.

Driving: “If your goal is to drive the cow forward, you want the horse’s shoulder putting pressure on the cow’s hip—between the outside of the hip and the cow’s tailhead,” says Crow.

Only after riders feel comfortable following and pushing a cow forward will he teach them to move up and turn the cow.

Turns: “If I’m going to make the cow turn, I want my horse’s shoulder even with the cow’s eyeball,” says Crow. “You’ll need to change your pace and move faster than the cow to get in position. You’re not merely pushing but moving forward to change the direction. Whether you’re circling the horse or turning, this is the position to keep the cow turning away from you.”

Once you learn where to position your horse, you’ll need to practice so you know which position to be in at the right time.

“Sometimes you’ll have a cow that wants to move off of the fence,” says Crow. “You may have to move quickly between drive and turn, then get back to the drive spot to keep the cow moving. If you linger at the eye during your turn, the cow may stop when you don’t want it to. Make sure to return to the drive line—focusing on the cow’s tailhead.”

Find a Practice Buddy

Most riders don’t have consistent access to cattle, but you can still practice your position when you ride with another horse and rider.

“It’s important for you to see where the cow’s escape routes are and how the horse’s position influences that,” says Crow. “When you’re just riding around a cow, I don’t think most riders are trying to see the cow’s perspective. Where does the cow see the open door? Learning the cow’s perspective can help you know where to be.”

Whether you’re new to cattle work or just want to practice cow work without cattle present, riding with another horse and rider can help you learn while removing some of the fear and speed. Ask a friend to ride with you and take turns being the rider and the cow. Make sure to ride horses that get along well and keep a safe distance as you practice.

Make sure to communicate. Since you’re riding with a friend, talk through your moves and share what you notice. Tell your friend where you’re going and when you’re moving in position to turn. Ask each other what you notice and where you felt you had to move or turn.

Crow suggests starting by driving your friend—who’s acting as the cow—forward along a fence line. To get in the best position, stay slightly behind the other horse, looking at his tail. That’s the point to watch as you push that horse’s hip and drive your friend forward.

Next, make your friend—the cow—turn. You’ll move from the drive position and instead focus to the cow’s eyeball. Move ahead so that your horse’s shoulder is even with the other horse’s eye. You’ll need to speed up your horse to move into position. When you move your position and focus, you’ll influence your friend to turn.

When you move your horse’s shoulder to ride parallel to the other horse’s eye, she’ll feel a shift in pressure and that the forward movement is blocked. There’s nowhere to go but to turn away from the pressure at the eye.

You can practice this drive-then-turn pressure change as you ride down your arena’s long side. This is a great way to practice going down the long side without the fear of too much speed. You’ll drive the “cow” down the fence, then turn when you’re ready.

Use caution and communicate as you ride with your friend. While moving in a trot or lope, you can learn what position to move into without fearing that the cow will move into you.

Cattle Work in Real Time

With lots of practice, you’ll learn how to read and influence cattle because of your positioning. It will feel natural and you won’t have to think so much.

“Now it’s muscle memory for me,” says Crow. “I grew up on a cattle ranch, and I had the opportunity to read cattle and learn how to influence their behavior by my positioning. The more you practice, the more it becomes second nature. You can just get to the spot where you want to be instead of having to stop and process, ‘Where should I be and where do I need to be?’ By the time you process all of that, the moment is lost, and the cow has just dragged you down the arena.”

When you’re confident knowing how to move the cow forward and how to make a turn, you have the basics down. Then there are always tweaks to help you move your horse through the turn and polish your moves. But you’ll need these fundamental driving and turning skills to get started.

Special thanks to Payton Porterfield and her horse, Steps of Perfection (bay), for helping demonstrate these exercises.

Read More: Introducing Your Horses to Cattle

This article about cattle work appeared in the April 2023 issue of Horse Illustrated magazine. Click here to subscribe!

The post Cattle Work 101 appeared first on Horse Illustrated Magazine.

To compete in reining or working cow horse competitions, your horse will need to turn quickly in response to your cues. In reining, the move is a “turnaround,” or spin—the horse moves forward around a pivot foot and continues the move until directed to stop.

For cow horse classes, your horse will also need to turn with precision. However, he’ll turn with his weight shifted back so he can move on to follow the cow in any new direction.

Trainer Aaron Ralston explains that all moves for reining or working cow horse events mirror—or were inspired by—horses on cattle ranches.

“Historically, riders wanted to show off their best-trained, most obedient horses,” he says. “While there’s little structure to working cattle in a natural environment, training your horse to do complex maneuvers shows skill and athleticism. The reining turnaround became that signature move that could be judged on a point system. Then when working cattle, your horse needs to be ready to turn sharply in any direction and to change directions often.”

A reining turn forces the horse’s weight to the inside.

“If the horse needed to stop and change directions quickly, he’d have to take a shuffle step before being able to leave in a new direction,” Ralston continues. “The ‘cow turn’ allows him to shift his weight back so that he can change directions without shuffling or regaining balance.”

Use the Clock

Horses should turn precisely—no matter which type of turn is requested. Ralston says he’s often asked about how to cue for the different turns needed in reining and cow horse events.

To explain how to cue for each turn, he teaches riders to envision a clock face over the top of the horse. Everything straight in front of you and the horse’s poll is 12 o’clock. Straight behind you toward the tail is 6 o’clock. Three and 9 o’clock are positioned at your right and left legs. Knowing these positions will help you know where to move your feet, rein and chin positions to cue for the different turns.

Reining Turns

In reining, you want forward motion into the turn. The outside foot is to cross over the inside front foot. The inside hind leg is the predominant pivot foot that bears most of the weight. The outside hind foot helps the horse balance and propels him around.

When being judged, the inside hind foot can move within a small area, but you don’t want that leg to displace into a new area. If the foot stays in the same area throughout the turn, you won’t incur a deduction.

The inside hind hoof moves underneath the center of the horse, right below the rider. That’s the pivot point. The more the horse contracts together over the pivot point, the faster he can move.

Imagine a figure skater who spins faster when pulling her arms into her center. The horse will also spin most quickly when his body is tucked and his pivot hoof reaches far under his body.

When you’re ready to start the reining turn to the right, you want your horse’s inside front hoof to step to 3 o’clock continuously to produce the balance point for the optimum turn. To achieve this, use three body cues: Move your inside foot off the horse and point it to 3 o’clock while your outside leg supports the horse without constant cueing.

Lastly, move your chin to 3 o’clock. When you move your chin, other body cues (including your shoulders and hips) naturally follow. Riding one-handed, move your hand above the saddle horn and toward 3 o’clock.

“I like to sit very neutrally with my shoulder, hip and heel alignment in place,” Ralston says. “The cues with the three body parts will tell the horse the destination I expect.”

Ralston says he makes sure to cue the horse once and expect perpetual motion. He doesn’t want to constantly kick the horse, but to teach the horse to keep going until he cues for something different.

If the horse needs encouragement, he will use his outside leg until the horse returns to the speed he wants. He says that if he always pushes with his outside leg, he finds that horses hunt for a change in leg pressure so that they can be done.

“If I’m always pushing with my outside leg, then he’s thinking, ‘When does that outside leg come off, when do I get to quit?’” Ralston says. “That creates a horse that takes smaller steps and is waiting to be done.”

When it’s time to stop the turn, take both legs off the horse and shift your weight to your legs. Return your reining hand to the middle of the horse’s neck and say “whoa.”

Working Cow Horse Turns

“A horse needs to be able to turn in any manner necessary that affects a cow’s flight zone in relation to the destination you want the cow to go,” Ralston says. “Typically, you won’t be making a cow go somewhere. Instead, you shut the door on all the options and open the door to the direction you’d like her to go. It’s pressure and release. The cow releases herself from the pressure the horse puts on and goes where she feels free.”

Ralston says if a cow goes somewhere, she’s going to look there before she takes a step. If you want a cow to go straight ahead but she looks to the right, you need to be able to get to the right side of the cow’s vision to block that move.

If a cow is looking at you and wanting to move toward you, you won’t want to do a reining turn. That type of turn with a forward swing would get into the cow’s flight zone and chase her around you. Instead, you’ll turn the hands of the clock past 3 o’clock, shifting your horse’s weight back.

To initiate the cow turn, move your foot, chin, and hands to 5 o’clock. When the horse’s front hoof turns to that increased turn directive, he has to shift his weight backward. The inside hind foot becomes the pivot foot. With the horse’s weight shifted back, you’ll be ready to go wherever you need to work the cow. The horse will be ready to drive off or turn.

“You could compare this movement in the horse to an athlete,” Ralston says. “Think of a basketball player or volleyball player with a wide stance, ready to move in any direction at any moment, depending on where the ball goes. In this position, you’re always ready.”

Will you ever use a reining turn while working a cow? Ralston says he uses the initial cue of the turn (without the constant spinning) when he wants to send a cow away from him in a defensive move. Once the cow is moving away, he’ll most likely cue the cow turn in the next move.

This article about turns in reining and working cow horse events appeared in the October 2022 issue of Horse Illustrated magazine. Click here to subscribe!

The post Perfect Your Reining and Working Cow Horse Turns appeared first on Horse Illustrated Magazine.